No approved product image is available.
Honeywell
Honeywell 914CE18-6 boot-sealed limit switch with 1.83 m cable
Net unit price, VAT 0%
€234.57
VAT 25.5% and delivery are shown separately in the request summary.
Current availability
- Minimum order
- 1 pcs
- Order increment
- 1 pcs
- Availability checked
- 1 Sept 2026, 09:25
914CE18-6 is a metal-housed miniature limit switch with a boot-sealed top pin plunger and a 1.83 m prewired cable. Its snap-action SPDT element provides one NC and one NO contact, and the enclosure meets IP66, IP67, and IP68 requirements.
Direct ordering is unavailable for this item.
Send the part number and quantity to ESYS for availability or compatibility confirmation.
Information for product selection
Typical applications
- Machine travel detection in wet or dusty conditions
- Replacement of a prewired top-plunger limit switch
- Mechanical position sensing with a boot-sealed plunger
Key specifications
- Component type
- Miniature limit switch
- Product series
- 914CE
- Actuator
- Boot-sealed top pin plunger
- Contact form
- SPDT / 1NC + 1NO / Form C
- Contact action
- Snap action
- Cable length
- 1.83 m
Show additional verified specifications
- Cable conductors
- 4 x 0.75 mm²
- Protection ratings
- IP66 / IP67 / IP68
- Mounting-center distance
- 25 mm
- Rated insulation voltage
- 250 V
- Mechanical life
- Up to 10 million operations
- Product standard
- EN 60947-5-1
Lifecycle
- Status
- Active
Compatibility and related parts
Hard-wired 4 x 0.75 mm² circuit and two-point 25 mm mount
System: Hard-wires through four 0.75 mm² conductors into an SPDT circuit within the switch ratings and mounts with two M5 or #10 screws on 25 mm centres; it has no separate mating connector.
